Shop
Showing 577–600 of 1371 results
-
Centrifugal Air Separator [PN 10]
600mm dia [CAS-600FF]
Features
- Air Separator is used to remove dissolved air/gases or micro bubbles from closed or open hydronic, HVAC, boiler other water / fluid systems. In the process it separates undissolved impurities as well.
- Of M.S. construction, with flanged connections, the air separator is provided with a high capacity automatic air vent at the top.
- For chilled water application, it should be insulated with 50 mm thick insulation to the specifications and cladded with 26G Aluminum cladding.
- Sediment Separator removes impurities heavier than water
- – Prevents Choking of strainers
- – Prevents damage to pumps and other equipment
Benefits
- Removes dissolved air and mcrobubbles
- Reduces corrosion in piping, sludge formation
- Reduces chances of air lock
- Removes impurities heavier than water
SKU: n/a -
Microbubble Air & Dirt Separator [PN 16]
600mm dia [MBDS-600FF]
Features
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- – Large surface area per volume
- – High probability of collision and adhesion of microbubbles, as the fluid flow gets deflected in different directions
- – Minimal resistance to fluid flow
- High capacity auto airvent
- Separation of dirt particles heavier than water is facilitated by
- – Low water velocity
- – Deflection of fluid stream in many different directions by the Pall rings
- – Creation of non-turbulent zone in the extended lower part
- Ball valve at the bottom to drain the collected dirt particles
Benefits
- Removes air microbubbles
- – Increases heat transfer efficiency
- – Reduces chances of air lock
- Reduces corrosion in piping and sludge formation
- Removes impurities heavier than water
- – Prevents choking of strainers
- – Prevents damage to pumps and other equipment
SKU: n/a -
Control Valves (for AHU) [3 point op]
65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [2F-65]
-26%![65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [2F-65]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/Control-Valves-for-AHU-3-point-op.png)
Control Valves (for AHU) [3 point op]65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [2F-65]
Features
- – S.G.Iron contruction
- – Simple, rugged construction
- – Direct connection to rotary actuator
- – Available in 2way(2S) or 3way (3S) Configuration
- – 3way valves suitable for diverting (1 inlet, 2 outlets) or mixing (2 inlets, 1 outlet) application
- – Connection size 25mm – standard & low Kv (SL)
Benefits
- Easy operation
- Highly reliable
- Long life
- Economical
- Easy maintenance
SKU: n/a -
Control Valves (for AHU) [3 point op]
65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [3F-65]
-26%Control Valves (for AHU) [3 point op]65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [3F-65]
Features
- – S.G.Iron contruction
- – Simple, rugged construction
- – Direct connection to rotary actuator
- – Available in 2way(2S) or 3way (3S) Configuration
- – 3way valves suitable for diverting (1 inlet, 2 outlets) or mixing (2 inlets, 1 outlet) application
- – Connection size 25mm – standard & low Kv (SL)
Benefits
- Easy operation
- Highly reliable
- Long life
- Economical
- Easy maintenance
SKU: n/a -
Valves
65 mm Cast Steel Y type Strainer [CS 3A]
The CS 3A Sant Valve is a durable and precise valve designed for fluid control in industrial and commercial applications. With high-grade materials, a high-pressure rating, and compatibility with standard connections, it ensures reliable performance, energy efficiency, and minimal maintenance. Ideal for HVAC and water systems.
SKU: n/a -
Valves
65 mm dia Brass Ball Valve PN 25 [FBV 2]
The FBV 2 Sant Valve is a durable, high-performance valve designed for precise flow control in industrial and commercial systems. Built with corrosion-resistant materials and capable of handling high pressures, it ensures reliable operation in HVAC and fluid distribution systems. Its easy installation and wide temperature tolerance make it a versatile and cost-effective solution for long-lasting performance.
SKU: n/a -
Valves
65 mm dia C.I. Balancing Valve PN 16 [SCBV]
The SCBV Sant Valve is a precision-engineered balancing valve for industrial and commercial systems. Available in Cast Iron (SCBV) and Ductile Iron (SCBV-A) variants, it ensures optimal flow control with a PN-16 pressure rating and flanged end connections. Designed for durability, it operates efficiently at temperatures up to 120°C and accommodates sizes ranging from 2½” to 24″. With corrosion-resistant AISI 410 stainless steel stems and EPDM seals, this valve guarantees reliable performance in HVAC and water distribution applications.
SKU: n/a -
Valves
65 mm dia C.I. Butterfly Valve PN 16 [CR 22A]
The CR 22A Sant Valve is a durable and efficient valve designed for precise flow control in industrial and commercial systems. Built with high-quality materials, it features a high-pressure rating, compatibility with standard connections, and wide temperature tolerance. Ideal for HVAC and water management, it offers reliable performance with minimal maintenance.
SKU: n/a -
Valves
65 mm dia C.I. Gate Valve PN 10 [CR 32A]
The CR 32A Sant Valve is a durable and efficient valve designed for precise flow and pressure control in industrial and commercial systems. With its robust materials, high-pressure rating, and versatile connections, it ensures reliable performance across a wide range of applications, including HVAC and water distribution.
SKU: n/a -
Valves
65 mm dia C.I. Gate Valve PN 16 [CR 32B]
The CR 32B Sant Valve is a durable and efficient valve designed for industrial and commercial systems. With its premium materials, high-pressure rating, and precise flow control capabilities, it ensures reliable performance in HVAC and water distribution applications. It features flanged or threaded connections, wide temperature tolerance, and minimal maintenance, offering a cost-effective solution for fluid control.
SKU: n/a -
Valves
65 mm dia C.I. Globe Valve PN 16 [CI 1A]
The CI 1A Sant Valve is a durable cast iron valve designed for precise flow regulation in high-pressure and standard applications. Offering excellent corrosion resistance, it features flanged or threaded connections for easy installation. With reliable performance across a wide temperature range, this valve is ideal for HVAC, water distribution, and industrial fluid control systems.
SKU: n/a -
Valves
65 mm dia C.I. Y Type Strainer [CI 16B]
The CI 16B Sant Valve is a durable, high-performance valve designed for industrial and commercial fluid control systems. Made from Cast Iron, it offers PN-16 pressure rating, precise flow control, and flanged end connections. With a temperature tolerance of up to 120°C, it is perfect for HVAC and water distribution systems, providing reliable and long-lasting performance with minimal maintenance.
SKU: n/a -
Valves
65 mm dia Dual Plate Wafer Check Valve PN 16 [DP]
HSN : 84813000
Product : Sant Dual Plate Wafer Check Valve
Pressure Rating : PN-16
Body Material cum Standard : Cast Iron
Pressure Description : Wafer Type Spring Loaded
Type of Seat : EPDM Rubber Lining
Type of Disc : Ductile Iron Disc
Trim : Spring & Pins SS 304
End Details : Wafer type suitable for clamping between flanges as per ASME B 16.5 Class-150SKU: 60mm DP
![600mm dia [CAS-600FF]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/Centrifugal-Air-Separator-PN-10.png)
![600mm dia [MBDS-600FF]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/airdirt.png)
![600mm dia [PSP-600FFL]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/pot-strainer.png)
![65 mm Cast Steel Y type Strainer [CS 3A]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/cs3A.png)
![65 mm dia Brass Ball Valve PN 25 [FBV 2]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/fbv2.png)
![65 mm dia C.I. Balancing Valve PN 16 [SCBV]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/SCBV.png)
![65 mm dia C.I. Butterfly Valve PN 16 [CR 22A]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/CR22A.png)
![65 mm dia C.I. Gate Valve PN 10 [CR 32A]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/CR-32A.png)
![65 mm dia C.I. Gate Valve PN 16 [CR 32B]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/CR-32B.png)
![65 mm dia C.I. Globe Valve PN 16 [CI 1A]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/CI-1A.png)
![65 mm dia C.I. Y Type Strainer [CI 16B]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/CI-16B.png)
![65 mm dia Dual Plate Wafer Check Valve PN 16 [DP]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/DP.png)
![65 mm Flanged 24V Modulating (4–20mA / 0–10V DC Belimo Make) 0–100°C PN16 Pressure Independent Control Valve (PICV) [Model No: CV-7AM]](https://shop.bmpsystems.in/wp-content/uploads/2025/10/v17.jpg)
