Shop
Showing 913–936 of 1220 results
-
Programmable
C-Stat 17B
Battery powered programmable room thermostat
Programmable room thermostats are widely recognised as one of the best ways to control central heating. Our C-Stat programmable room thermostats have a large display and intuitive user interface; they are easy to set-up and use. Battery-powered, they are suitable replacements for most room thermostats.
SKU: n/a -
Programmable
C-Stat 17M
A mains-powered programmable room thermostat is widely recognised as one of the best ways in which to control central heating. Our C-Stat programmable room thermostats have a large display and intuitive user interface; they are easy to set up and use. Being mains-powered, these models don’t need batteries changing every two years.
SKU: n/a -
Programmable
C1727
The C1727 is a 2-channel smart programmer that can control heat pumps, combi, and system boilers. Out of the box, it is Bluetooth and app enabled and has the option of a plug in Wi-Fi adapter to give complete smart control. The C1727 is designed to supersede the CentaurPlus and ServicePlus range of time switches and programmers by using the same wall plate with minor wiring changes, providing benefits of extra connectivity. The C1727 can easily control a single or double heating zone, or heating and stored hot water system. You can even control the schedule of an existing wired thermostat or add extra sensors to a spare zone to give further control. There is no hub or gateway to configure and power for remote access; simply plug the Wi-Fi card into the front slot, provide the password via the app and you will be connected. The C1727 also includes many of the latest Boiler Plus energy-saving features, such as optimum start and stop per heating zone, as well as on-off load compensation. This significantly improves boiler efficiency by preventing short-cycling and overshooting of temperature and helps to save more energy and improve efficiency.
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Digital Temp. Indicator K type with sensor [DTI-KTYPE-WS]
Features
- Brass body
- Nitrile sealing bushes
- Connection size 1/4″
- Facilitates measurment of temperature and pressure in water or non-corrosive fluids using portable thermometer / pressure gauge
- Maximum operating pressure 16 bar (20 bar optional)
- Maximum working temperature 110°C
Benefits
- Facilitates temperature and pressure measurement during commissioning and operation of HVAC system at various locations using one/few pressure gauges/tehermometers
- Reduced number of gauges/thermometers
- Averts variations in readings due to calibration difference of various pressure gauges/thermometers
- Reduced equipment failures
- Economical
SKU: n/a -
Sensors
Duct mount RH Sensor (30-80%) [S-2-D-H1]
The temperature controller shall be electronic, microprocessor based with display working on 24V AC with 0-10V DC output. It shall be capable of accepting inputs from 3 temperature sensors. One temperature sensor for space temperature measurement and the other two temperature sensors for coil inlet and outlet water temperature measurements. The controller shall be capable of comparing the signals and selecting the lower output to prevent excessive water flow through coil. In case of BMS, controller shall accept 0-10V DC signal from BMS.
SKU: n/a -
Sensors
Duct mount Temp & RH Sensor (-30?C-70?C, 30-80% RH) [S-2-D-T1.H1]
The temperature controller shall be electronic, microprocessor based with display working on 24V AC with 0-10V DC output. It shall be capable of accepting inputs from 3 temperature sensors. One temperature sensor for space temperature measurement and the other two temperature sensors for coil inlet and outlet water temperature measurements. The controller shall be capable of comparing the signals and selecting the lower output to prevent excessive water flow through coil. In case of BMS, controller shall accept 0-10V DC signal from BMS.
SKU: n/a -
Sensors
Duct mount Temp Sensor (-30?C-70?C) [S-2-D-T1]
The temperature controller shall be electronic, microprocessor based with display working on 24V AC with 0-10V DC output. It shall be capable of accepting inputs from 3 temperature sensors. One temperature sensor for space temperature measurement and the other two temperature sensors for coil inlet and outlet water temperature measurements. The controller shall be capable of comparing the signals and selecting the lower output to prevent excessive water flow through coil. In case of BMS, controller shall accept 0-10V DC signal from BMS.
SKU: n/a

















![Digital Temp. Indicator K type with sensor [DTI-KTYPE-WS]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/test_point.png)
![Duct mount Microprocessor based Temp & RH Transmitter (0?C-50?C, 0-100%RH) IP65 0-10Vdc output (2 nos) [T-4-D-T2.H2-2V]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/download-7.png)

![Duct mount RH Sensor (30-80%) [S-2-D-H1]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/download-8.png)
