Shop
Showing 961–984 of 1220 results
-
Industrial Automation
Industrial Bourdon Tube Type, 4 inch, 0 to 1000 kg/cm, 1/2 inch NPT (M), SS304 [PBE200]
-31%![Industrial Bourdon Tube Type, 4 inch, 0 to 1000 kg/cm, 1/2 inch NPT (M), SS304 [PBE200]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/PBE200.png)
Industrial AutomationIndustrial Bourdon Tube Type, 4 inch, 0 to 1000 kg/cm, 1/2 inch NPT (M), SS304 [PBE200]
- Suitable for corrosive environments and gaseous or liquid media
- Excellent load cycle stability and shock resistance
- Utility, pipe line, air & water application
- With electric contact on demand
SKU: n/a -
Industrial Automation
K, Dx, 12 x 300 mm, 1/2 inch BSP (M) ACF, SS316, 800?C, CKD6, Bulk WP head [RHW506]
-31%![K, Dx, 12 x 300 mm, 1/2 inch BSP (M) ACF, SS316, 800?C, CKD6, Bulk WP head [RHW506]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/RHW506.png)
Industrial AutomationK, Dx, 12 x 300 mm, 1/2 inch BSP (M) ACF, SS316, 800?C, CKD6, Bulk WP head [RHW506]
- Flexible sheath -50 to 400°C range
- Lengths up to 50 meters
- Termination : Aluminium head with threaded cap and chain
- Different types of terminal heads are available
- 1/2″BSP (F) single cable entry with single compression gland
- Dual entries and glands are optional
- SS316 sheath material
- Elements are terminated into nickel plated brass terminals mounted on high purity ceramic terminal block mounted on spring loaded stainless steel disc
- Spring loading protects ceramic terminal block from damage due to impact and vibrations. It ensures proper contact at the hot end inside the thermowell in thermocouple-thermowell assemblies
SKU: n/a -
Industrial Automation
K, Dx, 6 x 500 mm, SS316, 1/2 inch NPT (M) ACF, 800?C, Bulk WP head [RHW506]
-31%Industrial AutomationK, Dx, 6 x 500 mm, SS316, 1/2 inch NPT (M) ACF, 800?C, Bulk WP head [RHW506]
- Flexible sheath -50 to 400°C range
- Lengths up to 50 meters
- Termination : Aluminium head with threaded cap and chain
- Different types of terminal heads are available
- 1/2″BSP (F) single cable entry with single compression gland
- Dual entries and glands are optional
- SS316 sheath material
- Elements are terminated into nickel plated brass terminals mounted on high purity ceramic terminal block mounted on spring loaded stainless steel disc
- Spring loading protects ceramic terminal block from damage due to impact and vibrations. It ensures proper contact at the hot end inside the thermowell in thermocouple-thermowell assemblies
SKU: n/a -
Industrial Automation
K, Dx, 6 x 900 mm, SS316, 1/2 inch NPT (M) ACF, 800?C, Bulk WP head [RHW506]
-31%Industrial AutomationK, Dx, 6 x 900 mm, SS316, 1/2 inch NPT (M) ACF, 800?C, Bulk WP head [RHW506]
- Flexible sheath -50 to 400°C range
- Lengths up to 50 meters
- Termination : Aluminium head with threaded cap and chain
- Different types of terminal heads are available
- 1/2″BSP (F) single cable entry with single compression gland
- Dual entries and glands are optional
- SS316 sheath material
- Elements are terminated into nickel plated brass terminals mounted on high purity ceramic terminal block mounted on spring loaded stainless steel disc
- Spring loading protects ceramic terminal block from damage due to impact and vibrations. It ensures proper contact at the hot end inside the thermowell in thermocouple-thermowell assemblies
SKU: n/a -
Industrial Automation
K, Dx, 8 x 300 mm, SS316, 1/2 inch NPT (M) ACF, 800?C, Bulk WP head [RHW506]
-31%Industrial AutomationK, Dx, 8 x 300 mm, SS316, 1/2 inch NPT (M) ACF, 800?C, Bulk WP head [RHW506]
- Flexible sheath -50 to 400°C range
- Lengths up to 50 meters
- Termination : Aluminium head with threaded cap and chain
- Different types of terminal heads are available
- 1/2″BSP (F) single cable entry with single compression gland
- Dual entries and glands are optional
- SS316 sheath material
- Elements are terminated into nickel plated brass terminals mounted on high purity ceramic terminal block mounted on spring loaded stainless steel disc
- Spring loading protects ceramic terminal block from damage due to impact and vibrations. It ensures proper contact at the hot end inside the thermowell in thermocouple-thermowell assemblies
SKU: n/a -
Industrial Automation
K, Sx, 21 x 1000 mm, SS316, Adjustable flange, 800?C, CKS6, WP head [RHW207]
-31%Industrial AutomationK, Sx, 21 x 1000 mm, SS316, Adjustable flange, 800?C, CKS6, WP head [RHW207]
- Non-bendable sheath
- -50 to 250°C range
- Standard lengths are 100, 150 & 300mm. Longer assemblies not recommended
- Termination : Aluminium head with threaded cap and chain with single compression cable gland
- Elements are terminated into nickel plated brass terminals mounted on high purity ceramic terminal block
SKU: n/a -
Control Valves & Controller for FCU's
Microprocessor based controller with LCD display, 230Vac, Range 15?C-35?C, 2 position output, ON/OFF and 3 speed Fan Control [C-1A-T1-D0-F]
-26%![Microprocessor based controller with LCD display, 230Vac, Range 15?C-35?C, 2 position output, ON/OFF and 3 speed Fan Control [C-1A-T1-D0-F]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/Control-Valves-for-AHU-3-point-op.png)
Control Valves & Controller for FCU'sMicroprocessor based controller with LCD display, 230Vac, Range 15?C-35?C, 2 position output, ON/OFF and 3 speed Fan Control [C-1A-T1-D0-F]
Features
- – Multi-seat construction (IPR protected).
- – High rangeability/turn-down-ratio above 500(Normal valves-50)
- – Pressure balanced plug construction
- – Low operating force requirement
Benefits
- Can be used against high differential pressure, closer to pump and still control the flow
- Prevents energy wastage
- Very low leakage
- High Δ T ensures high chiller efficiency
- Eliminates need of balancing valve.
SKU: n/a -
Measurement & Recording Data Loggers
Microprocessor based Temp. Sensor Bulb Type with Cable Gland (-) 30?C to 70?C [S-X-B4-T1.G]
-26%![Microprocessor based Temp. Sensor Bulb Type with Cable Gland (-) 30?C to 70?C [S-X-B4-T1.G]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/measure.png)
Measurement & Recording Data LoggersMicroprocessor based Temp. Sensor Bulb Type with Cable Gland (-) 30?C to 70?C [S-X-B4-T1.G]
Features
- Wide range – temperature, RH, voltage, event
- Small size, poratable, low cost
- On-line & Off-line modes of operation
- Built in clock
- Stand-alone, long operational life
- Re-usable device, replaceable battery
- Non-volatile solid state memory up to 16 K sample point storage capacity
- Easy and instant connection to PC with interface for programming and data download
- Easy to set up windows based software package to analyse data in tabular and graphical format and export to spreadsheet/word processing programs
- Log, store, retrieve, share, transfer and print data
Benefits
- Rugged, maintenance free, long life
- User friendly, easy to program
- Data retention in case of battery failure/replacement
- Easy data sharing and transfer
- Simplified record keeping
- Replaces cumbersome and costly strip-chart recorders
SKU: n/a -
Wall Mounted Fans
Model AER-M
Direct drive fan with expanded performance range specifically designed for wall-mounted clean air applications. Available in sizes 500 to 900 mm.
- Capacities from 424 to 49,390 cmh (250 to 29,070 cfm)
- Up to 610 Pa (2.45 in. wg) of static pressure
Certifications:AMCA licensed for Air and Sound performance (AMCA 211 and 311)
SKU: n/a -
Plenum Fans
Model APM-M
Model APM-M is a commercial grade plenum fan combining performance and reliability into a lighter duty, economical design. The compact direct drive eliminates the cost, maintenance and complexity of traditional belt drive, plenum fans. APM-M’s are an excellent option as a stand-alone fan or in parallel fan array applications.
- Capacities up to 36,000 CMH (21,200 CFM)
- Up to 1,860 Pa (7.5 in. wg)
Certifications:AMCA licensed for Air and Sound performance (AMCA 211 and 311)
SKU: n/a -
Inline Fans
Model BSQ-M
Model BSQ-M is a belt drive, centrifugal inline fan for clean air applications including intake, exhaust, return, or make-up air systems where space is a prime consideration. Units feature removable side panels for easy access for inspection and service.
- Fan diameters range from 70mm up to 420mm
- Capacities up to 45193 CMH (26600 CFM)
- Up to 956 Pa (3.8 in. wg)
Certifications:AMCA Sound and Air
SKU: n/a -
Centrifugal Fans
Model CDB-100
CDB-100 offers a non-overloading backward-inclined wheel. The fan is suitable for clean air, supply or exhaust applications.
– Fan diameters range from 225mm up to 1250mm
– Capacities range up to 150000 CMH (88500 cfm)
– Up to 1600 Pa (6.4 in. wg)Certifications:AMCA licensed for Air and Sound performance (AMCA 211 and 311)
AMCA licensed for FEI, Air & Sound Performance
SKU: n/a -
Centrifugal Fans
Model CSB
Model CSB is a single inlet, single-width centrifugal blower that offers backward-inclined (BI) wheels. The CSB is an excellent choice for exhaust air, supply air, filtration, heating, air conditioning, and industrial process applications.
- Capacities up to 42,000 cmh (25,000 cfm)
- Up to 1,500 Pa (6 in. wg)
Certifications:AMCA licensed for FEI, Air & Sound Performance
SKU: n/a -
HVLS Fans
Model DS-M
Model DS-M high volume, low-speed (HVLS) ceiling fans are ideal for year-round comfort in air circulation and destratification applications. Featuring an aerodynamic, extruded aluminum airfoil design and a high-efficiency direct drive motor, model DS-M delivers maximum airflow at a fraction of the operating cost compared to other HVLS fans. Its universal ceiling mount and plug-and-play design make the DS-M fan the easiest HVLS fan to install in the market!
- Fan diameters between 16 and 24 ft.
- Up to 413,100 cmh (243,000 cfm)
Certifications:AMCA Circulating Fan Performance
SKU: n/a
![Microprocessor based Transmitter RH Transmitter Duct mount (30-80%) 0-10 Vdc output [T-2-D-H1-V]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/download-7.png)
