Anergy
Showing 97–120 of 182 results
-
Centrifugal Air Separator [PN 10]
500mm dia [CAS-500FF]
Features
- Air Separator is used to remove dissolved air/gases or micro bubbles from closed or open hydronic, HVAC, boiler other water / fluid systems. In the process it separates undissolved impurities as well.
- Of M.S. construction, with flanged connections, the air separator is provided with a high capacity automatic air vent at the top.
- For chilled water application, it should be insulated with 50 mm thick insulation to the specifications and cladded with 26G Aluminum cladding.
- Sediment Separator removes impurities heavier than water
- – Prevents Choking of strainers
- – Prevents damage to pumps and other equipment
Benefits
- Removes dissolved air and mcrobubbles
- Reduces corrosion in piping, sludge formation
- Reduces chances of air lock
- Removes impurities heavier than water
SKU: n/a -
Microbubble Air & Dirt Separator [PN 16]
500mm dia [MBDS-500FF]
Features
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- – Large surface area per volume
- – High probability of collision and adhesion of microbubbles, as the fluid flow gets deflected in different directions
- – Minimal resistance to fluid flow
- High capacity auto airvent
- Separation of dirt particles heavier than water is facilitated by
- – Low water velocity
- – Deflection of fluid stream in many different directions by the Pall rings
- – Creation of non-turbulent zone in the extended lower part
- Ball valve at the bottom to drain the collected dirt particles
Benefits
- Removes air microbubbles
- – Increases heat transfer efficiency
- – Reduces chances of air lock
- Reduces corrosion in piping and sludge formation
- Removes impurities heavier than water
- – Prevents choking of strainers
- – Prevents damage to pumps and other equipment
SKU: n/a -
Centrifugal Air Separator [PN 10]
600mm dia [CAS-600FF]
Features
- Air Separator is used to remove dissolved air/gases or micro bubbles from closed or open hydronic, HVAC, boiler other water / fluid systems. In the process it separates undissolved impurities as well.
- Of M.S. construction, with flanged connections, the air separator is provided with a high capacity automatic air vent at the top.
- For chilled water application, it should be insulated with 50 mm thick insulation to the specifications and cladded with 26G Aluminum cladding.
- Sediment Separator removes impurities heavier than water
- – Prevents Choking of strainers
- – Prevents damage to pumps and other equipment
Benefits
- Removes dissolved air and mcrobubbles
- Reduces corrosion in piping, sludge formation
- Reduces chances of air lock
- Removes impurities heavier than water
SKU: n/a -
Microbubble Air & Dirt Separator [PN 16]
600mm dia [MBDS-600FF]
Features
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- – Large surface area per volume
- – High probability of collision and adhesion of microbubbles, as the fluid flow gets deflected in different directions
- – Minimal resistance to fluid flow
- High capacity auto airvent
- Separation of dirt particles heavier than water is facilitated by
- – Low water velocity
- – Deflection of fluid stream in many different directions by the Pall rings
- – Creation of non-turbulent zone in the extended lower part
- Ball valve at the bottom to drain the collected dirt particles
Benefits
- Removes air microbubbles
- – Increases heat transfer efficiency
- – Reduces chances of air lock
- Reduces corrosion in piping and sludge formation
- Removes impurities heavier than water
- – Prevents choking of strainers
- – Prevents damage to pumps and other equipment
SKU: n/a -
Control Valves (for AHU) [3 point op]
65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [2F-65]
Control Valves (for AHU) [3 point op]65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [2F-65]
Features
- – S.G.Iron contruction
- – Simple, rugged construction
- – Direct connection to rotary actuator
- – Available in 2way(2S) or 3way (3S) Configuration
- – 3way valves suitable for diverting (1 inlet, 2 outlets) or mixing (2 inlets, 1 outlet) application
- – Connection size 25mm – standard & low Kv (SL)
Benefits
- Easy operation
- Highly reliable
- Long life
- Economical
- Easy maintenance
SKU: n/a -
Control Valves (for AHU) [3 point op]
65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [3F-65]
Control Valves (for AHU) [3 point op]65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [3F-65]
Features
- – S.G.Iron contruction
- – Simple, rugged construction
- – Direct connection to rotary actuator
- – Available in 2way(2S) or 3way (3S) Configuration
- – 3way valves suitable for diverting (1 inlet, 2 outlets) or mixing (2 inlets, 1 outlet) application
- – Connection size 25mm – standard & low Kv (SL)
Benefits
- Easy operation
- Highly reliable
- Long life
- Economical
- Easy maintenance
SKU: n/a -
Pressurised Expansion Tank
750 L Closed Expansion Tank with membrane, PN 10 [CET-750]
Features
- Mild steel shell
- Interchangeable EPDM/Buty membrane
- Maximum operating presure 10 bar
- Working temperature – 10°C to 70°C
- Suitable for drinking water applications
- Requires no maintenance
Benefits
- Compensates for pressure variation due to water valume changes with temperature variations in HVAC Systems
- Maintains constant water flow even at the most weak points in water supply systems
- Reduces stress on hydronic system components
- Prevents water hammering, stabilizes pressure variation
- Reduces pump cycling
SKU: n/a -
Pressurised Expansion Tank
750 L Closed Expansion Tank with membrane, PN 16 [CET-750]
Features
- Mild steel shell
- Interchangeable EPDM/Buty membrane
- Maximum operating presure 10 bar
- Working temperature – 10°C to 70°C
- Suitable for drinking water applications
- Requires no maintenance
Benefits
- Compensates for pressure variation due to water valume changes with temperature variations in HVAC Systems
- Maintains constant water flow even at the most weak points in water supply systems
- Reduces stress on hydronic system components
- Prevents water hammering, stabilizes pressure variation
- Reduces pump cycling
SKU: n/a -
Control Valves (for AHU) [3 point op]
80 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [2F-80]
Control Valves (for AHU) [3 point op]80 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [2F-80]
Features
- – S.G.Iron contruction
- – Simple, rugged construction
- – Direct connection to rotary actuator
- – Available in 2way(2S) or 3way (3S) Configuration
- – 3way valves suitable for diverting (1 inlet, 2 outlets) or mixing (2 inlets, 1 outlet) application
- – Connection size 25mm – standard & low Kv (SL)
Benefits
- Easy operation
- Highly reliable
- Long life
- Economical
- Easy maintenance
SKU: n/a -
Control Valves (for AHU) [3 point op]
80 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [3F-80]
Control Valves (for AHU) [3 point op]80 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [3F-80]
Features
- – S.G.Iron contruction
- – Simple, rugged construction
- – Direct connection to rotary actuator
- – Available in 2way(2S) or 3way (3S) Configuration
- – 3way valves suitable for diverting (1 inlet, 2 outlets) or mixing (2 inlets, 1 outlet) application
- – Connection size 25mm – standard & low Kv (SL)
Benefits
- Easy operation
- Highly reliable
- Long life
- Economical
- Easy maintenance
SKU: n/a -
Suction Guide with Polymer Pall Rings [PN 16]
80 mm dia [SGPP-80FF]
Features
- New Technology for Dirt removal
- Uses PALL rings instead of perforated sheet strainer
- Dirt removed by simply opening drain plugs
- Built-in flow straightener
- Compact size
Benefits
- No need to open end flange and bolts and to remove strainer for cleaning
- Less time and effort required for cleaning
- Debris, lighter than water, which generally chokes the perforated strainer floats to the top and can easily be removed by opening top dead plug and draining the water.
- Low Pressure drop
- Provides optimum flow condition at the pump inlet
- Improves pump efficiency
SKU: n/a -
Microbubble Air & Dirt Separator [PN 16]
80mm dia [MBDS-80FF]
Features
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- – Large surface area per volume
- – High probability of collision and adhesion of microbubbles, as the fluid flow gets deflected in different directions
- – Minimal resistance to fluid flow
- High capacity auto airvent
- Separation of dirt particles heavier than water is facilitated by
- – Low water velocity
- – Deflection of fluid stream in many different directions by the Pall rings
- – Creation of non-turbulent zone in the extended lower part
- Ball valve at the bottom to drain the collected dirt particles
Benefits
- Removes air microbubbles
- – Increases heat transfer efficiency
- – Reduces chances of air lock
- Reduces corrosion in piping and sludge formation
- Removes impurities heavier than water
- – Prevents choking of strainers
- – Prevents damage to pumps and other equipment
SKU: n/a -
Suction Guide with Pall Rings [PN 16]
80mm dia [SGP-80FF]
Features
- New Technology for Dirt removal
- Uses PALL rings instead of perforated sheet strainer
- Dirt removed by simply opening drain plugs
- Built-in flow straightener
- Compact size
Benefits
- No need to open end flange and bolts and to remove strainer for cleaning
- Less time and effort required for cleaning
- Debris, lighter than water, which generally chokes the perforated strainer floats to the top and can easily be removed by opening top dead plug and draining the water.
- Low Pressure drop
- Provides optimum flow condition at the pump inlet
- Improves pump efficiency
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Adaptor for Pressure Gauge [ADPT, PG6]
Features
- Brass body
- Nitrile sealing bushes
- Connection size 1/4″
- Facilitates measurment of temperature and pressure in water or non-corrosive fluids using portable thermometer / pressure gauge
- Maximum operating pressure 16 bar (20 bar optional)
- Maximum working temperature 110°C
Benefits
- Facilitates temperature and pressure measurement during commissioning and operation of HVAC system at various locations using one/few pressure gauges/tehermometers
- Reduced number of gauges/thermometers
- Averts variations in readings due to calibration difference of various pressure gauges/thermometers
- Reduced equipment failures
- Economical
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Air Flow Switch 10 Amps [FSA-101]
Features
- Simple and rugged construction
- Suitable for ducts carrying air or any other non-corrosive gas
- Indicates the presence or absence of air flow to start and stop electrically operated equipment in a flow or noflow condition
- Can be used for monitoring flows in horizontal and vertical ducts with upward air flow
Principle of Operation
- When the air flow hits the paddle of the flow switch, it operates an SPDT switch.
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Auto Air-Vent 1″ (25mm) dia, PN 10 [AAV25-10]
Features
- Brass construction
- Nylon float/internals
- Built-in check valve
- Sizes 3/8″, 1/2″, 3/4″, 1″
- Maximum operating pressure 10 bar
- Maximum working temperature 110°C
Benefits
- Releases the entrapped air in hydronic systems
- Reduced corrosion
- Better system efficiency
- No air blockages
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Auto Air-Vent 1/2″ (15mm) dia, PN 10 [AAV15-10]
Features
- Brass construction
- Nylon float/internals
- Built-in check valve
- Sizes 3/8″, 1/2″, 3/4″, 1″
- Maximum operating pressure 10 bar
- Maximum working temperature 110°C
Benefits
- Releases the entrapped air in hydronic systems
- Reduced corrosion
- Better system efficiency
- No air blockages
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Auto Air-Vent 1/2″ (15mm) dia, PN 16 [AAV15-16]
Features
- Brass construction
- Nylon float/internals
- Built-in check valve
- Sizes 3/8″, 1/2″, 3/4″, 1″
- Maximum operating pressure 10 bar
- Maximum working temperature 110°C
Benefits
- Releases the entrapped air in hydronic systems
- Reduced corrosion
- Better system efficiency
- No air blockages
SKU: n/a