Shop
Showing 1009–1023 of 1023 results
-
Industrial Automation
Thermowell, Threaded, Barstock, Parallel shank, SS304, 16 mm, U 200 mm, 1/2 inch BSP (M), 1/2 inch BSP (F) [TBR200]
-31%
Industrial AutomationThermowell, Threaded, Barstock, Parallel shank, SS304, 16 mm, U 200 mm, 1/2 inch BSP (M), 1/2 inch BSP (F) [TBR200]
- Standard Material : SS304 / SS316
- SC : 1/2″ BSP/NPSM
- PC : 1/2″ BSP/NPT, 3/4″ BSP/NPT, 1″ BSP/NPT
- U : 50 / 100 / 150… upto 1200mm
- Bore : 6.5mm for 6mm dia sensors
- D : 16mm for 1/2″ BSP/NPT, 19mm for 3/4″ BSP/NPT, 25mm for 1″ BSP/NPT
- Other threads, lengths, sizes, materials on request
SKU: n/a -
Sensors
Wall mount RH Sensor (30-80%) [S-2-W-H1]
The temperature controller shall be electronic, microprocessor based with display working on 24V AC with 0-10V DC output. It shall be capable of accepting inputs from 3 temperature sensors. One temperature sensor for space temperature measurement and the other two temperature sensors for coil inlet and outlet water temperature measurements. The controller shall be capable of comparing the signals and selecting the lower output to prevent excessive water flow through coil. In case of BMS, controller shall accept 0-10V DC signal from BMS.
SKU: n/a -
Sensors
Wall mount Temp & RH Sensor (-30?C-70?C, 30-80% RH) [S-2-W-T1.H1]
The temperature controller shall be electronic, microprocessor based with display working on 24V AC with 0-10V DC output. It shall be capable of accepting inputs from 3 temperature sensors. One temperature sensor for space temperature measurement and the other two temperature sensors for coil inlet and outlet water temperature measurements. The controller shall be capable of comparing the signals and selecting the lower output to prevent excessive water flow through coil. In case of BMS, controller shall accept 0-10V DC signal from BMS.
SKU: n/a -
Sensors
Wall mount Temp Sensor (-30?C-70?C) [S-2-W-T1]
The temperature controller shall be electronic, microprocessor based with display working on 24V AC with 0-10V DC output. It shall be capable of accepting inputs from 3 temperature sensors. One temperature sensor for space temperature measurement and the other two temperature sensors for coil inlet and outlet water temperature measurements. The controller shall be capable of comparing the signals and selecting the lower output to prevent excessive water flow through coil. In case of BMS, controller shall accept 0-10V DC signal from BMS.
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Water Flow Switch 220Vac 10 Amps Brass Body, 1″ BSP [FSW-B-251]
Features
- Simple and rugged construction
- Suitable for non-corrosive fluids
- Indicates the presence or absence of water flow to start and stop electrically operated equipment in a flow or non-flow condition
- Can be used for monitoring flows in horizontal and vertical pipelines with upward water flow
- Available in different models
Principle of Operation
- When the water flow hits the paddle of the flow switch, it operates an SPDT switch.
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Water Flow Switch 220Vac 10 Amps Polymer Composite Body, 1″ BSP [FSW-P-251]
Auto Air-Vents, Switches, Test PointWater Flow Switch 220Vac 10 Amps Polymer Composite Body, 1″ BSP [FSW-P-251]
Features
- Simple and rugged construction
- Suitable for non-corrosive fluids
- Indicates the presence or absence of water flow to start and stop electrically operated equipment in a flow or non-flow condition
- Can be used for monitoring flows in horizontal and vertical pipelines with upward water flow
- Available in different models
Principle of Operation
- When the water flow hits the paddle of the flow switch, it operates an SPDT switch.
SKU: n/a
