Anergy
Showing 73–96 of 146 results
-
Centrifugal Air Separator [PN 10]
500mm dia [CAS-500FF]
Features
- Air Separator is used to remove dissolved air/gases or micro bubbles from closed or open hydronic, HVAC, boiler other water / fluid systems. In the process it separates undissolved impurities as well.
- Of M.S. construction, with flanged connections, the air separator is provided with a high capacity automatic air vent at the top.
- For chilled water application, it should be insulated with 50 mm thick insulation to the specifications and cladded with 26G Aluminum cladding.
- Sediment Separator removes impurities heavier than water
- – Prevents Choking of strainers
- – Prevents damage to pumps and other equipment
Benefits
- Removes dissolved air and mcrobubbles
- Reduces corrosion in piping, sludge formation
- Reduces chances of air lock
- Removes impurities heavier than water
SKU: n/a -
Microbubble Air & Dirt Separator [PN 16]
500mm dia [MBDS-500FF]
Features
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- – Large surface area per volume
- – High probability of collision and adhesion of microbubbles, as the fluid flow gets deflected in different directions
- – Minimal resistance to fluid flow
- High capacity auto airvent
- Separation of dirt particles heavier than water is facilitated by
- – Low water velocity
- – Deflection of fluid stream in many different directions by the Pall rings
- – Creation of non-turbulent zone in the extended lower part
- Ball valve at the bottom to drain the collected dirt particles
Benefits
- Removes air microbubbles
- – Increases heat transfer efficiency
- – Reduces chances of air lock
- Reduces corrosion in piping and sludge formation
- Removes impurities heavier than water
- – Prevents choking of strainers
- – Prevents damage to pumps and other equipment
SKU: n/a -
Centrifugal Air Separator [PN 10]
600mm dia [CAS-600FF]
Features
- Air Separator is used to remove dissolved air/gases or micro bubbles from closed or open hydronic, HVAC, boiler other water / fluid systems. In the process it separates undissolved impurities as well.
- Of M.S. construction, with flanged connections, the air separator is provided with a high capacity automatic air vent at the top.
- For chilled water application, it should be insulated with 50 mm thick insulation to the specifications and cladded with 26G Aluminum cladding.
- Sediment Separator removes impurities heavier than water
- – Prevents Choking of strainers
- – Prevents damage to pumps and other equipment
Benefits
- Removes dissolved air and mcrobubbles
- Reduces corrosion in piping, sludge formation
- Reduces chances of air lock
- Removes impurities heavier than water
SKU: n/a -
Microbubble Air & Dirt Separator [PN 16]
600mm dia [MBDS-600FF]
Features
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- – Large surface area per volume
- – High probability of collision and adhesion of microbubbles, as the fluid flow gets deflected in different directions
- – Minimal resistance to fluid flow
- High capacity auto airvent
- Separation of dirt particles heavier than water is facilitated by
- – Low water velocity
- – Deflection of fluid stream in many different directions by the Pall rings
- – Creation of non-turbulent zone in the extended lower part
- Ball valve at the bottom to drain the collected dirt particles
Benefits
- Removes air microbubbles
- – Increases heat transfer efficiency
- – Reduces chances of air lock
- Reduces corrosion in piping and sludge formation
- Removes impurities heavier than water
- – Prevents choking of strainers
- – Prevents damage to pumps and other equipment
SKU: n/a -
Control Valves (for AHU) [3 point op]
65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [2F-65]
![65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [2F-65]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/Control-Valves-for-AHU-3-point-op.png)
Control Valves (for AHU) [3 point op]65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [2F-65]
Features
- – S.G.Iron contruction
- – Simple, rugged construction
- – Direct connection to rotary actuator
- – Available in 2way(2S) or 3way (3S) Configuration
- – 3way valves suitable for diverting (1 inlet, 2 outlets) or mixing (2 inlets, 1 outlet) application
- – Connection size 25mm – standard & low Kv (SL)
Benefits
- Easy operation
- Highly reliable
- Long life
- Economical
- Easy maintenance
SKU: n/a -
Control Valves (for AHU) [3 point op]
65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [3F-65]
Control Valves (for AHU) [3 point op]65 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [3F-65]
Features
- – S.G.Iron contruction
- – Simple, rugged construction
- – Direct connection to rotary actuator
- – Available in 2way(2S) or 3way (3S) Configuration
- – 3way valves suitable for diverting (1 inlet, 2 outlets) or mixing (2 inlets, 1 outlet) application
- – Connection size 25mm – standard & low Kv (SL)
Benefits
- Easy operation
- Highly reliable
- Long life
- Economical
- Easy maintenance
SKU: n/a -
Control Valves (for AHU) [3 point op]
80 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [2F-80]
Control Valves (for AHU) [3 point op]80 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [2F-80]
Features
- – S.G.Iron contruction
- – Simple, rugged construction
- – Direct connection to rotary actuator
- – Available in 2way(2S) or 3way (3S) Configuration
- – 3way valves suitable for diverting (1 inlet, 2 outlets) or mixing (2 inlets, 1 outlet) application
- – Connection size 25mm – standard & low Kv (SL)
Benefits
- Easy operation
- Highly reliable
- Long life
- Economical
- Easy maintenance
SKU: n/a -
Control Valves (for AHU) [3 point op]
80 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [3F-80]
Control Valves (for AHU) [3 point op]80 mm 2/3 Way Control Valve (CI Body) with linkage set (PN 10) [3F-80]
Features
- – S.G.Iron contruction
- – Simple, rugged construction
- – Direct connection to rotary actuator
- – Available in 2way(2S) or 3way (3S) Configuration
- – 3way valves suitable for diverting (1 inlet, 2 outlets) or mixing (2 inlets, 1 outlet) application
- – Connection size 25mm – standard & low Kv (SL)
Benefits
- Easy operation
- Highly reliable
- Long life
- Economical
- Easy maintenance
SKU: n/a -
Suction Guide with Polymer Pall Rings [PN 16]
80 mm dia [SGPP-80FF]
Features
- New Technology for Dirt removal
- Uses PALL rings instead of perforated sheet strainer
- Dirt removed by simply opening drain plugs
- Built-in flow straightener
- Compact size
Benefits
- No need to open end flange and bolts and to remove strainer for cleaning
- Less time and effort required for cleaning
- Debris, lighter than water, which generally chokes the perforated strainer floats to the top and can easily be removed by opening top dead plug and draining the water.
- Low Pressure drop
- Provides optimum flow condition at the pump inlet
- Improves pump efficiency
SKU: n/a -
Microbubble Air & Dirt Separator [PN 16]
80mm dia [MBDS-80FF]
Features
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- – Large surface area per volume
- – High probability of collision and adhesion of microbubbles, as the fluid flow gets deflected in different directions
- – Minimal resistance to fluid flow
- High capacity auto airvent
- Separation of dirt particles heavier than water is facilitated by
- – Low water velocity
- – Deflection of fluid stream in many different directions by the Pall rings
- – Creation of non-turbulent zone in the extended lower part
- Ball valve at the bottom to drain the collected dirt particles
Benefits
- Removes air microbubbles
- – Increases heat transfer efficiency
- – Reduces chances of air lock
- Reduces corrosion in piping and sludge formation
- Removes impurities heavier than water
- – Prevents choking of strainers
- – Prevents damage to pumps and other equipment
SKU: n/a -
Suction Guide with Pall Rings [PN 16]
80mm dia [SGP-80FF]
Features
- New Technology for Dirt removal
- Uses PALL rings instead of perforated sheet strainer
- Dirt removed by simply opening drain plugs
- Built-in flow straightener
- Compact size
Benefits
- No need to open end flange and bolts and to remove strainer for cleaning
- Less time and effort required for cleaning
- Debris, lighter than water, which generally chokes the perforated strainer floats to the top and can easily be removed by opening top dead plug and draining the water.
- Low Pressure drop
- Provides optimum flow condition at the pump inlet
- Improves pump efficiency
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Adaptor for Pressure Gauge [ADPT, PG6]
Features
- Brass body
- Nitrile sealing bushes
- Connection size 1/4″
- Facilitates measurment of temperature and pressure in water or non-corrosive fluids using portable thermometer / pressure gauge
- Maximum operating pressure 16 bar (20 bar optional)
- Maximum working temperature 110°C
Benefits
- Facilitates temperature and pressure measurement during commissioning and operation of HVAC system at various locations using one/few pressure gauges/tehermometers
- Reduced number of gauges/thermometers
- Averts variations in readings due to calibration difference of various pressure gauges/thermometers
- Reduced equipment failures
- Economical
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Air Flow Switch 10 Amps [FSA-101]
Features
- Simple and rugged construction
- Suitable for ducts carrying air or any other non-corrosive gas
- Indicates the presence or absence of air flow to start and stop electrically operated equipment in a flow or noflow condition
- Can be used for monitoring flows in horizontal and vertical ducts with upward air flow
Principle of Operation
- When the air flow hits the paddle of the flow switch, it operates an SPDT switch.
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Auto Air-Vent 1″ (25mm) dia, PN 10 [AAV25-10]
Features
- Brass construction
- Nylon float/internals
- Built-in check valve
- Sizes 3/8″, 1/2″, 3/4″, 1″
- Maximum operating pressure 10 bar
- Maximum working temperature 110°C
Benefits
- Releases the entrapped air in hydronic systems
- Reduced corrosion
- Better system efficiency
- No air blockages
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Auto Air-Vent 1/2″ (15mm) dia, PN 10 [AAV15-10]
Features
- Brass construction
- Nylon float/internals
- Built-in check valve
- Sizes 3/8″, 1/2″, 3/4″, 1″
- Maximum operating pressure 10 bar
- Maximum working temperature 110°C
Benefits
- Releases the entrapped air in hydronic systems
- Reduced corrosion
- Better system efficiency
- No air blockages
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Auto Air-Vent 1/2″ (15mm) dia, PN 16 [AAV15-16]
Features
- Brass construction
- Nylon float/internals
- Built-in check valve
- Sizes 3/8″, 1/2″, 3/4″, 1″
- Maximum operating pressure 10 bar
- Maximum working temperature 110°C
Benefits
- Releases the entrapped air in hydronic systems
- Reduced corrosion
- Better system efficiency
- No air blockages
SKU: n/a -
Auto Air-Vents, Switches, Test Point
Auto Air-Vent 3/4″ (20mm) dia, PN 10 [AAV20-10]
Features
- Brass construction
- Nylon float/internals
- Built-in check valve
- Sizes 3/8″, 1/2″, 3/4″, 1″
- Maximum operating pressure 10 bar
- Maximum working temperature 110°C
Benefits
- Releases the entrapped air in hydronic systems
- Reduced corrosion
- Better system efficiency
- No air blockages
SKU: n/a -
Microbubble Air & Dirt Separator [PN 16]
Auto Airvent 3/4″, PN 16 (1 no. Required per Air Separator/ Microbubble Air & Dirt Separator of 80mm to 250mm) [AAV-20-16]
![Auto Airvent 3/4", PN 16 (1 no. Required per Air Separator/ Microbubble Air & Dirt Separator of 80mm to 250mm) [AAV-20-16]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/airdirt.png)
Microbubble Air & Dirt Separator [PN 16]Auto Airvent 3/4″, PN 16 (1 no. Required per Air Separator/ Microbubble Air & Dirt Separator of 80mm to 250mm) [AAV-20-16]
Features
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- Air separation process based on the concept of coalescence, microbubbles tend to adhere to a surface and then grow together to form larger air bubbles.
- – Large surface area per volume
- – High probability of collision and adhesion of microbubbles, as the fluid flow gets deflected in different directions
- – Minimal resistance to fluid flow
- High capacity auto airvent
- Separation of dirt particles heavier than water is facilitated by
- – Low water velocity
- – Deflection of fluid stream in many different directions by the Pall rings
- – Creation of non-turbulent zone in the extended lower part
- Ball valve at the bottom to drain the collected dirt particles
Benefits
- Removes air microbubbles
- – Increases heat transfer efficiency
- – Reduces chances of air lock
- Reduces corrosion in piping and sludge formation
- Removes impurities heavier than water
- – Prevents choking of strainers
- – Prevents damage to pumps and other equipment
SKU: n/a -
Sensors
Bulb Type Temp. Sensor with Cable Gland (-30?C-70?C) [S-X-B4-T1.G]
The temperature controller shall be electronic, microprocessor based with display working on 24V AC with 0-10V DC output. It shall be capable of accepting inputs from 3 temperature sensors. One temperature sensor for space temperature measurement and the other two temperature sensors for coil inlet and outlet water temperature measurements. The controller shall be capable of comparing the signals and selecting the lower output to prevent excessive water flow through coil. In case of BMS, controller shall accept 0-10V DC signal from BMS.
SKU: n/a
![500mm dia [CAS-500FF]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/Centrifugal-Air-Separator-PN-10.png)
![500mm dia [PSP-500FFL]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/pot-strainer.png)
![80 mm dia [SGPP-80FF]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/suction-1080x1080-1.png)
![Adaptor for Pressure Gauge [ADPT, PG6]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/test_point.png)
![Air Flow Switch 10 Amps [FSA-101]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/air_flow.png)
![Auto Air-Vent 1" (25mm) dia, PN 10 [AAV25-10]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/auto_air_vent.png)
![Bulb Type Temp. Sensor with Cable Gland (-30?C-70?C) [S-X-B4-T1.G]](https://shop.bmpsystems.in/wp-content/uploads/2025/02/download-8.png)
